Payment & Shipping Terms:
|Product Series:||Optical Transceivers SFP||Data Rate:||4.25, 2.125, 1.063 GBd|
|Product Type:||LC||Fiber Type:||Multimode Glass|
|Maximum Distance(M):||500||Nominal Optical Wavelength (nm):||850|
Avago’s AFBR-57R5AEZ optical transceiver supports high-speed serial links over multimode optical fiber at signaling rates up to 4.25 Gb/s. Compliant with Small
Form Pluggable (SFP) Multi Source Agreement (MSA) mechanical and electrical specifications for LC Duplex transceivers, ANSI Fibre Channel FC-PI, FC-PI-2 and compatible with IEEE 802.3 for gigabit applications. The part is electrically interoperable with SFP conformant devices.
As an enhancement to the conventional SFP interface defined in SFF-8074i, the AFBR-57R5AEZ is compliant to SFF-8472 (digital diagnostic interface for optical transceivers). Using the 2-wire serial interface defined in the SFF-8472 MSA, the AFBR-57R5AEZ provides real time temperature, supply voltage, laser bias current, laser average output power and received input power. This information is in addition to conventional SFP base data. The digital diagnostic interface also adds the ability to disable the transmitter (TX_DISABLE), monitor for Transmitter Faults (TX_FAULT), and monitor for Receiver Loss of Signal (RX_LOS).
The AFBR-57R5AEZ can be installed in any SFF-8074i compliant Small Form Pluggable (SFP) port regardless of host equipment operating status. The AFBR-57R5AEZ is hot-pluggable, allowing the module to be installed while the host system is operating and on-line. Upon insertion, the transceiver housing makes initial contact with the host board SFP cage, mitigating potential damage due
to Electro-Static Discharge (ESD).
– Transmitted optical power
– Received optical power
– Laser bias current
– Supply voltage
– 4.25 GBd Fibre Channel operation for FC-PI 400-M5-SN-I and 400-M6-SN-I
– 2.125 GBd Fibre Channel operation for FC-PI 200-M5-SN-I and 200-M6-SN- I
– 1.0625 GBd Fibre Channel operation for FC-PI 100-M5-SN-I and 100-M6- SN-I
– 150m with 50 µm MMF, 70m with 62.5µm MMF
– 300m with 50µm MMF, 150m with 62.5µm MMF
– 500m with 50µm MMF, 300 m with 62.5µm MMF
TIA/EIA604-10 (FOCIS 10)
– Director class switches
– Fabric switches
– HBA cards